4th Axis vs 5th Axis Rotary Table: Which Do You Need?

Choosing between a 4th and 5th axis comes down to what your parts actually require. This guide breaks down what each axis adds, the cost difference, and a simple decision checklist.

What a 4th Axis Adds

A 4th axis adds rotation around the C-axis to a standard 3-axis machine. It lets you index a part to multiple faces in one setup, or rotate continuously while cutting — useful for cylindrical parts, engraving, and batch work. A 4th axis is the lowest-cost way to reduce setups.

TURN’s TNC series 4-axis tables use a roller cam drive with zero backlash and 6 arcsec repeatability, in platter sizes from 170 to 320 mm.

What a 5th Axis Adds

A 5th axis adds a second rotating axis — typically a tilting A-axis on a trunnion table. With two rotary axes, the cutter can reach nearly every face of a part in a single setup, enabling complex 3D contours, impellers and angled features. 5-axis tables support both 3+2 positional machining and full simultaneous 5-axis cutting.

TURN’s TAR series 5-axis tables combine a roller cam tilting axis with a rotary axis, holding 6–8 arcsec repeatability.

3+2 Positioning vs Simultaneous 5-Axis

In 3+2 machining, the rotary axes position the part and then lock while a standard 3-axis toolpath runs — simpler and adequate for many parts. Simultaneous 5-axis moves all five axes together, needed for complex curved surfaces but requiring more advanced CAM and control.

Cost and Complexity

A 4th axis is a modest investment and straightforward to integrate. A 5-axis table costs more and needs a control and CAM setup that supports 5-axis, but it can replace multiple setups and fixtures — often paying back on complex parts.

Decision Checklist

  • Do you mainly need multiple faces or continuous rotation? → 4th axis
  • Do your parts have complex 3D surfaces or angled features? → 5th axis
  • Is your control and CAM 5-axis capable? → required for 5th axis
  • What is your workpiece size and weight? → match platter diameter and load
  • What accuracy do you need? → 4th and 5th roller cam tables both hold 6–8 arcsec

Explore 4-Axis Tables · Explore 5-Axis Tables

General engineering guidance. For exact specifications, request the TURN datasheet for your model.

TURN manufactures 4th & 5th axis CNC rotary tables in Dongguan, with roller cam, direct drive, worm gear and hydraulic series. Need a recommendation? Send us your machine model and part drawing — our engineers will reply within one business day. Get a Quote →

Filed under: Selection Guides

Scroll to Top